Foam Proportioners
Fire fighters, particularly in urban areas, need the ability to apply foam retardant rather than water to handle chemical and other blazes. GAAM supplies a number of components that can be fitted to fire response vehicles. The Quenchmaster pump foam proportioning system is manufactured by GAAM in a range of models to suit various flow rates and pressures. It provides reliable mixture of foam/water and can be mounted remotely or in a control panel. Quenchmaster is simple to install and operate and can be retrofitted to an existing vehicle or installed on a new fire fighting vehicle. The Hale Foammaster is an efficient, economical foam proportioning unit made especially for slip-on units and single line Class A applications. It delivers accurate proportioning and features an easy-toinstall operator panel with on/off, percentage metering and priming control in one lever.
 blue_arrow Sales Enquiries
blue_arrow General Enquiries
blue_arrow Quenchmaster
blue_arrow Quenchmaster with Solenoid - 12/24 volt
blue_arrow FoamLogix
blue_arrow Fireboss



 

Quenchmaster

Click to enlarge

The reliable Foam Proportioning System to meet your needs.
Quenchmaster is an around the pump foam proportioning system developed to provide simplicity of installation and operation. This reliable foam system provided in a range of models to suit various flow rates and pressure is available for remote mounting or control panel mounting. Any of the wide range of models can be retro-fitted to an existing vehicle or installed on a new fire fighting vehicle.

Features

  • 12 Models to choose from.
  • Available for panel or remote mounting.
  • Flow rates 200 to 1500 litres per minute.
  • Operating pressure 600 - 1000 kPa.
  • Easy installation for retro fitting.
  • Proportion 'A' Class Foam 0.1% to 1% and 'B' class foam 3% to 6%.

blue_arrow Download Quenchmaster Datasheet

Quenchmaster with Solenoid - 12/24 volt

qenchmaster-with-Solenoid-1
Click to enlarge 		This electronic control module is the interface between the Quenchmaster and the fire-fighter. The red LED indicates that the foam operation is on and the orange LED indicates that the foam system is in flushing stage for 35secs.

FoamLogix

Click to enlarge

FoamLogix 2.1-A is a true electronic discharge side proportioning unit in a cost effective, compact package. It has full function digital control with a Class 1 flowsensor.

Features & benefits

  • Computer controlled, accurate Class A foam proportioning at a value price.
  • Push button proportioning.
  • Arrow buttons allow changing foam percentage from 0.1% to 1.0%.
  • Reliable and accurate Class 1 Flow Sensor. Measures water flow and FoamLogix injects the corresponding proper amount of Class A foam concentrate.
  • Operator Pre-Set — Digital control means the operator presses one (1) button for precise foam delivery every time. Departments can set the system up to run the percentage of foam they require.
  • System integration — Available fully integrated onto a new Hale pump or in kits to fit other pump brands.
  • Wide range of flow sensor options from pipe saddle clamps to stainless steel weld-on fittings are available.

Fireboss

Click to enlarge

The Class ‘A’ Inline Foam Proportioner.
The Fireboss is an inline Class ‘A’ foam Proportioning  system available in three capacity models giving foam accurately proportioned from 0.1% to 1.0%. The system operates at 700 kPa. inlet pressure, which will deliver a nominal branch pressure of 350 kPa. With 30 mts. of hose. Fireboss has been developed to provide simplicity of installation and ease of operation.

Features

  • 3 Models to choose from.
  • Stainless Steel / uPVC Construction
  • Flow rates 60 to 250 litres per minute.
  • Operating pressure 700 kPa.
  • Easy installation.
  • Proportion 'A' Class Foam 0.1% to 1%
  • Pick up tube screwed to suit Std. Foam Drums.